Rubber Steel self-aligning roller 22222 110*200*53 mm Roller bearing a low capacity loss
Description:
| Model | Spherical taper roller bearing Symmetrical spherical roller type, asymmetric spherical roller type, spherical roller bearing |
| ID*OD*W (mm) | 110*200*53 mm |
| Series | 222 |
| Weight(kg) | 7 |
| Cage material | Steel |
| Basic dynamic load ratings/C | 572 kN |
| Basic static load ratings/C0 | 640 kN |
| Fatigue load limit | 6.2 kN |
| Reference speed | 3000 rmp/min |
| Limiting speed | 4000 rmp/min |
| Clearance | Standard |
| Vibration Level | V1, V2, V3, V4 |
| Precision Rating | P0,P6,P5, |
| Feature: | Low noise, less vibration, high speed&temperature, and long
life |
Detail Images:
Basic Information:
1. support radial load and axial load, or just axial load, and can
work under high speed.
2. As single row angular contact ball bearings can only support
axial load in a single direction, in bear radial load, will cause
additional axial force, and can only limit the axial displacement
of the shaft or housing in one direction.
3. If pairs of double installation, the bearing outer ring
relatively wide end face of wide and narrow end facing the narrow
end. This can avoid additional axial force, and the shaft or
housing to limit the range of the axial clearance in both
directions.
4. The angular contact ball bearing was more balls than the deep
groove ball bearing, so the load-bearing capacity is the highest in
all ball bearing, and it has a strong rigidity, rotate stably. It
can also through the inner and outer rings relative displacement on
the radial clearance.
Classification:
1. Internal Structure and Retainer Material Variation
C: Symmetrical roller, Stamped Steel retainer
CA: Symmetrical roller, one-piece brass cage
CTN1: Symmetrical roller, nylon cage
Q: Bronze cage
MB: Symmetrical roller, Two-piece brass cage
EM: Symmetrical roller, Special alloy Integral cage.
2. External form change
K: Tapered bore bearing,taper is 1:12
K30: Tapered bore bearing,taper is 1:30
N: A snap ring groove on the outer ring
W33: There are three lubrication groove and three lubrication holes
in the outer ring
3. Ring high-temperature tempering
S0: Bearing rings tempering at high temperatures, operating
temperature up to 150 degrees Celsius.
S1: Bearing rings tempering at high temperatures, operating
temperature up to 200 degrees Celsius.
S2: Bearing rings tempering at high temperatures, operating
temperature up to 250 degrees Celsius.
22222 C/CA W33 Spherical roller bearing Designs:
C Features a stamped steel cage and strengthened symmetric roller.
As a second-generation design, these bearing designs are optimized
to offer considerably higher load ratings than conventional designs
for a broad range of applications and long service life.
CA The alternative design of the second generation, these bearings
feature a precision-machined brass cage and strengthened symmetric
roller and are equivalent to C design in load rating. They are used
to exchange with C.
Contact us:
YGB Bearing Co., Ltd is an integrated and modern enterprise engaged
in the R&D, manufacture, and sales of high-quality bearings. We
are the Bearing experts serving the OEM throughout China as well as
the international markets, such as deep groove ball bearing,
spherical roller bearing and tapered roller bearing as well as
other kinds of bearings.
If needs be free to contact us.
