SKF FAG Tapered Roller Bearings Single Row 30307 30308 30309 High
Precision For Auto Spares Parts
Description :
| Model | 30309 |
| Bearing material | GCr15/AISI52100/100Cr6 |
| ID*OD*W (mm) | 45 x 100 x 27.25mm |
| Seal type | double shields |
| Lead time | Stock or 15-30days |
| Weight(kg) | 0.97 |
| Payment terms | T/T, L/C |
| Limiting speed | 7000 r/min |
| Clearance | C2,C0,C3,C4,C5 |
| Viberation Level | V1,V2,V3,V4 |
| Precision Rating | P0,P6,P5, |
| MOQ | No MOQ |
| Port | Shanghai |
| Grease | Mobil polyrex EM,Kyodo Yushi SRL |
Advantage of tapered roller bearing
This conical geometry is used as it gives a larger contact patch,
which permits greater loads to be carried than with spherical
(ball) bearings, while the geometry means that the tangential
speeds of the surfaces of each of the rollers are the same as their
raceways along the whole length of the contact patch and no
differential scrubbing occurs. When a roller slides rather than
rolls, it can generate wear at the roller-to-race interface, i.e.
the differences in surface speeds create a scrubbing action. Wear
will degenerate the close tolerances normally held in the bearing
and can lead to other problems. Much closer to pure rolling can be
achieved in a tapered roller bearing and this avoids rapid wear.
Photo:
Drawing:
Size range:
Single-row tapered roller bearing:
Internal diameter size range: 20mm ~ 1270mm
Outside diameter size range: 40mm ~ 1465mm
Width and size range: 15mm ~ 240mm
Double-row tapered roller bearing:
Internal diameter size range: 38mm ~ 1560mm
Outside diameter size range: 70mm ~ 1800mm
Width and size range: 50mm ~ 460mm
Four-row tapered roller bearing:
Internal diameter size range: 130mm ~ 1600mm
Outside diameter size range: 200mm ~ 2000mm
Width and size range: 150mm ~ 1150mm
Our Main Products
Deep groove ball bearings
Cylindrical roller bearings
Needle roller bearings
Thrust ball bearings
Thrust roller bearings
Spherical roller bearings
Angular contact ball bearings
Advantages
1. high speed and high precision
2. long service lifetime
3. lowest noise and good performance
Payment
1: T/T: 30% as deposit and 70% balance after get copy of B/L.
2: L/C (cannot for branded bearings.)
3: Discuss together between buyer and supplier.
Dear friend, any questions please feel free to contact us, let's
learn and grow together in bearing worlds!
